top of page

Parallel Seismic Testing

When no information is known about the length of a foundation, ACER can employ a variety of methods to determine the size and condition of a buried foundation. Often the top of the foundation is not accessible or too small to be assessed via Sonic Echo/Impulse Response Methods, which can require alternate assessment methods. Parallel Seismic testing is conducted by drilling a water-filled or grouted & cased borehole next to the foundation in question and assessed by striking the top or side of the foundation and recording the velocity of the responses as the equipment is lowered into the borehole. Depth assessment accuracy can be determined within 5% of the size of the foundation, and additional details such as details about the soils beneath the foundation can also be obtained. This method is suitable for concrete, steel, wood, and masonry foundations.

Billboard Foundation Investigation

20211217_093142.jpg

Once the data is collected in the field, a seismic analysis and display program is then utilized to view the full range of the data in a stacked orientation. The data is then analyzed to identify a clear break in the data resulting from the change in velocity from the foundation member to the surrounding soils. When the wave must travel through more soil below the pile tip the wave arrives at the transducer at a later time. This generates a difference in the first wave arrival times that occur at the tip of the pile, indicative of the foundation depth

halfcellpotentials.JPG
Additional Geophysics & Non-Destructive Testing Services Provided by ACER:
bottom of page